Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast clean & accurate results on doors 34mm to 58mm thick even in hardwood. Steel plates & body. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Contents: 1 x Guide Bush Collar 12 x Face Plate Templates 5 x Mortise Templates 6 x Spacer FingersFeatures & Benefits• For cutting commonly needed mortise & face plate recesses • Includes 16 interchangeable templates • Suitable for most common sash mortises and dead locks • Fast clean and accurate results on doors 34mm – 58mm thick • Additional templates available separatelyContents• Guide Bush Collar • 7/8x 1/8 (22.2×156 mm) Face Plate Template • 7/8x 6 (22.5×152.5 mm) Face Plate Template • 1x 4 3/4 (25.4×121 mm) Face Plate Template • 1x 5 (25.4×127.5 mm) Face Plate Template • 1x 5 1/4 (25.4×133.5 mm) Face Plate Template • 1x 5 3/4 (25.4×145 mm) Face Plate Template • 1x 6 (25.4×153 mm) Face Plate Template • 1x 6 (25.4×156.5 mm) Face Plate Template • 1x 6 1/2 (25.4×165.5 mm) Face Plate Template • 1x 7 (25.4×177 mm) Face Plate Template • 1x 2 1/4 (25×57.5 mm) Upper Face Plate Template • 1x 2 1/4 (26×56.5 mm) Lower Face Plate Template • 1x 6 3/8 (25.6x162mm) Face Plate Template • 5/8 x 2 7/8 (16×72 mm) Mortise Template • 5/8 x 4 1/4 (16×107 mm) Mortise Template • 3/4 x 3 1/8 (19×78 mm) Mortise Template • 3/4 x 4 1/4 (19×109 mm) Mortise Template • Spacer Fingers (x6)
£102.98
